You’ve found the kitchen cabinet you’ve been wincing at for years — the deep one, the floor one, the corner one. Now the question everyone asks: what does it actually cost to fix it with a custom pull-out shelf?
Straight answer: for most Phoenix homeowners, a typical pull-out project lands between $999 and $2,500 installed, with a single cabinet running a few hundred dollars more than you might expect and a full kitchen running toward the higher end. Here’s how the price is built, what moves it up or down, and how to get a number you can trust before you commit.
What you’re actually paying for
A custom pull-out shelf isn’t a hardware store product. You’re paying for four things:
- The cabinet measurement and design. Every pull-out is built to your cabinet’s exact width and depth — and cabinet dimensions vary more than you’d think, especially in older homes.
- The wood. We build from quality hardwoods, cut and finished to hold up to years of daily use, spills, and Arizona heat.
- The hardware. This is the part that separates a good pull-out from a bad one. Ours ride on 100 lb capacity, full-extension, ball-bearing slides with soft-close — the hardware that stays smooth for a decade, not a season.
- The install. Measured, built to fit, installed, and guaranteed for life.
That’s why “$299 pull-out shelves” from a big box don’t compare: they’re off the shelf (pun intended), fit with shims, and the slides are rated for a fraction of the load.
The numbers, broken down
Here’s how pricing typically works for Phoenix-area projects:
Single cabinet pull-outs
A single custom pull-out — measured, built, installed — generally lands in the low hundreds for a standard cabinet width, and a bit more for deep-base or corner configurations. Most people don’t stop at one: once the first cabinet works, the second one is never very far away.
A typical kitchen project
A common project is around ten custom pull-outs, built to fit and professionally installed. That configuration starts around $999 — yes, that includes the install. It’s the price point we quote most often, and it’s the one that shows up in our customer reviews.
Larger and specialty projects
Full pantry systems, bathroom and laundry rooms, entertainment centers, and specialty builds (corner cabinets, under-sink configurations around plumbing, trash and recycling pull-outs) run higher than the basic kitchen package. The exact number depends on cabinet size, count, and the hardware tier you choose.
The three things that move your price
1. Cabinet size
Wider and deeper cabinets use more wood and need higher-rated hardware. A 36-inch pantry pull-out costs more than a 12-inch spice pull-out.
2. Hardware tier
The slides carry the entire load of the shelf. We only install 100 lb capacity, full-extension, ball-bearing slides — and we don’t recommend less, because the slides are the part you use a hundred times a day. If someone quotes you dramatically cheaper, ask what the slides are rated for.
3. Custom-fit complexity
Corner cabinets, under-sink cabinets with pipes, and anything that doesn’t fit the standard rectangle costs more in design and labor. This is also where custom beats off-the-shelf: the fit is exact, nothing is forced.
Where the money goes wrong (and how to avoid it)
Three mistakes inflate costs or kill the value:
- Quoting without measuring. If a price comes before someone has measured your actual cabinet, it’s a guess. Ours come after we measure in your kitchen.
- Cheap slides. The $50 savings on hardware becomes a $500 replacement problem in two years.
- No warranty. If the build or the install fails, who fixes it? Ours are guaranteed for life — that’s not a marketing line, it’s the reason we build with hardware we’d use in our own kitchens.
For a deeper look at what good hardware looks like, our post on what makes a quality pull-out shelf covers the specs that actually matter.
How to get an exact number
The only way to get a real price — not a range — is an in-home measurement. Here’s the process:
- Free in-home consultation. We walk your kitchen, talk about how you use each cabinet, and measure everything ourselves.
- Written quote. A clear number, line-item style, before any work starts. The number you see is the number you pay.
- Build and install. Shelves are built to your measurements, installed — most in a single visit — and backed by the lifetime guarantee.
No obligation, no hard sell, and the consultation itself is free.
Get your free quote
If you’ve been guessing at what a pull-out project costs, stop guessing. Schedule the free consultation, get the written quote, and you’ll know the exact number for your cabinets in days.
Request your free quote here, or call (602) 799-9626.
Shelf Theory is family-owned and locally manufactured in Phoenix. We serve Phoenix, Scottsdale, Paradise Valley, Mesa, Chandler, Gilbert, Tempe, Glendale, Peoria, and the greater Valley.